PV Wire Connector Inserting, Nut Tightening and Terminal Crimping Machine
|FOB Price:||US $40,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $40,000/ Piece|
|Payment Terms:||L/C, T/T|
- Model NO.: BZW-3.0+GF+N
- Condition: New
- Warranty: 24 Months
- Wire Range: 4-6mm2
- Stripping Length: 0.1-18.5mm
- Crimping Force: 30kn
- Weight: 1100kg
- Transport Package: Wooden Case
- Origin: Jiangsu Changzhou
- Driven Type: Electric
- Certification: CCC, ISO, CE
- Automatic Grade: Automatic
- Cutting Length: 60-99999mm
- Feeding Speed: Max. 8.0 M/S
- Voltage: 220V 50Hz
- Trademark: BOZHIWANG
- Specification: 3500*1200*1700mm
This equipment is the upgraded version of the BZW-3.0+GF mode, mainly for photovoltaic connector wiring harness processing industry. It has added the connector inserting and nut tightening work station based on the original machine, the crimped terminal is inserted into the connector and tight the nut at one time, which largely increases the automation level of wire processing on the PV junction box.
1.It automatically sets the cutting length, crimping the terminal and feeding the connector;
2.The crimping monitoring device monitors the reliability of the terminal crimping;
3.After the crimping, the terminal will be automatically inserted into the connector, the whole process is automatic.
4.The nut of the connector is automatically tighten and set the value of the torque.
5.Full closed loop flexible wire feeding system, accurate length and with no damage on the wire surface;
6.Servo crimping system, crimping compression ratio is stable, to meet the requirements of cross section analysis.
7.The connector nut tightening distance can be adjusted as per the actual condition.
8.The nut is flexibly tightened to avoid any damage on the surface of the nut.
9.The wire feeding system is optional ;
10.The CFM device is optional.
1.Wire range: 4-6mm2 (Other size can be special ordered)
2.Cutting length: 60-99999mm(Other size can be special ordered)
3.Cutting precision: ±(0.2%*L+1)mm
5.Feeding speed: Max. 8.0 m/s
6.Crimping force: 30KN
7.Voltage: 220V 50HZ
8.Air supply: 0.5 Mpa-0.7 Mpa,8m3/h
9.Weight: about 1100kg
11.Detecting ability: wire knotting, wire lacking, terminal lacking, air pressure ,bare wire and term inal inserting detecting;
12.Applicator range: OTP applicator, European applicator and pneumatic applicator
13.It can be equipped with pressure monitoring system, monitoring the pressure during the whole processing and 100% traceability.
14.Function: automatic wire cutting, terminal crimping, connector inserting and nut tightening.